ReigaHood 2-Point Mortise Lock for Pella Storm Doors Only Black

Overview

Upgrade or replace the mortise lock on a Pella storm door with the ReigaHood 2-Point Mortise Lock. This model is designed to fit Pella storm doors specifically and is not universal. The two bolts are set 2-1/2 inches apart for balanced latch engagement. The backset is 7/8 inch, and the deadlatch is centered to align with the handle PZ distance of 2-1/2 inches, ensuring smooth operation with standard Pella hardware.

Important compatibility note: Please compare your existing hardware before ordering to ensure a proper match. The faceplate screw holes are spaced at 7-1/4 inches for secure mounting. Screws are included to support a straightforward installation.

Why this replacement may fit your routine

With two bolts and a slim black finish, this lock offers a robust locking point that can enhance daily security without altering the door’s appearance. The non-handed design means you can install on doors that swing either left or right, simplifying the upgrade process. The included hardware and standard measurements help you achieve a clean, professional look on most Pella storm doors.

What comes with the kit and practical tips

• Includes screws for quick mounting; you may reuse your existing hardware if it matches the new fit.
• Helpful tips: protect the door surface by placing cardboard between screwdriver and door to prevent paint marring.
• Lock removal uses four spring loaded tabs; gently pry to retract tabs before removing the faceplate.
• Cylinder removal requires aligning the cam and turning the thumb turn slowly to release the cylinder.
• Note: Replacement cylinder must be supplied by Pella to ensure compatibility with this mortise lock.

Designed for Pella storm doors, this replacement offers a practical option for refreshing a door’s locking mechanism. It emphasizes precise bolt spacing and a clean aesthetic while maintaining compatibility with standard Pella components. While the unit is intended for Pella doors, taking careful measurements beforehand helps you decide if it is the right fit for your current hardware setup.