PneumaticPlus 4 Pack Anti Vibration Pads 4x4x7-8 in Rubber & Cork

Overview

Meet the PneumaticPlus 4 Pack Anti Vibration Pads, a compact base solution designed to reduce vibration transfer and stabilize a broad range of equipment. Each pad blends rubber and cork to create a cushioned foundation that helps distribute weight evenly and soften resonances that travelers through floors or shelves.

These pads are rated for up to 50 PSI per square inch of base loading, making them suitable for many machines found in home workshops, offices, or light industrial settings. When installed with care—typically with a pad the size of the foot and about a 1/2 inch overlap around the edge—you can help ensure proper loading and effective vibration damping without over-stress on the base.

What you get

• Four pads in a single pack, ready to deploy across multiple legs or corners
• Rubber and cork construction with a 50 PSI max load
• Designed for indoor and outdoor use, resisting aging, compression set, water, and oil
• Alternate rib height for additional vibration isolation across varying weight loads
• Versatile applications across air compressors, HVAC gear, stereo systems, treadmills, and more

Key benefits and real-world uses

The rubber-cork combination provides a resilient cushion that helps stabilize equipment on different floor types, from concrete to wood. The pads’ 50 PSI loading guideline helps you estimate appropriate sizing for your machine base, while the double-thickness option can be used if additional isolation is desired. The design is intended to hold up under moisture and oil exposure, with aging resistance that supports long-term use in varied environments.

How to size and install

Proper sizing centers on distributing the machine weight across the pad surface. For example, an 1,800-pound machine aligns with roughly a 6" x 6" pad (1,800 pounds ÷ 50 PSI ≈ 36 square inches). If you use four legs, a 3" x 3" pad per leg can work when weight is distributed evenly. If hold-down bolts are necessary, isolate them from the machine to preserve damping performance.

• When base loading approaches 50 PSI, select pads that match the foot area with about 1/2 inch overlap for even contact
• A double thickness pad can be used to achieve the desired loading or isolation
• Always confirm the maximum loading capacity of 50 PSI to avoid overstressing the base

Why choose Rubber & Cork pads?

The rubber and cork blend offers a balanced cushion that works indoors and outdoors, with resistance to aging, compression, water, and oil exposure. The alternate rib height feature provides an extra margin of vibration isolation on both light and heavy loads. This setup can help keep noise and vibration from affecting nearby equipment, shelves, or flooring, while remaining simple to install and ready for a variety of common setups.

Real-life scenarios

Use cases range from home gym equipment and audio systems to small air compressors or HVAC components. The included guidance on loading and overlap helps you tailor the setup to your specific machine footprint and weight distribution, without making bold guarantees about outcomes. The aim is to provide a practical, configurable solution that supports steadier operation and reduced perceived vibration.