PentaUSA Tile Grout Repair Kit – White Premixed Acrylic Sanded Grout Filler (8.8oz)

Overview

Refresh cracked or discolored grout with a ready-to-use, white acrylic sanded grout filler. This kit blends premixed grout material with a precise applicator, designed for DIY tile repairs on floors, walls, and countertops. The material bonds to existing grout and tile, yielding a solid, grout-like finish that enhances both look and durability without requiring a full regrout.

Ideal for seekers of a practical, mess-easy solution, the kit supports quick improvements in kitchens, bathrooms, and laundry areas. While it performs best in splash zones and areas with occasional moisture, it is not intended for continuous submersion environments.

Key benefits

• Touch dry in about 2 hours and full cure in 24 hours, helping you plan around a single project window.
• One 8.8 oz tube covers roughly 29 square feet at a typical 1 mm depth, making it suitable for small to medium touch-ups.
• Water-resistant finish designed to refresh missing grout lines and guard against moisture in interior wet zones.
• Low-odor, water-based formula for indoor use; thick consistency stays in grout lines without dripping.
• Built-in anti-clog nozzle pin in the cap helps keep the tube sealed between uses; includes a scraper for smoothing.
• Layerable acrylic sanded formula lets you build thickness with multiple thin coats for deeper gaps.
• Available in additional sizes and colors to match different tile joints; a targeted repair option alongside full regrouting.

What you can fix

Use this kit to address missing sections, crack lines, and discoloration in bathroom and kitchen grout. It works well on tile floors, shower walls, backsplashes, and countertops where a refreshed grout line is wanted.

How it works

The premixed acrylic sanded grout cures into a solid, grout-like material that bonds to existing grout and tile, creating a reinforced repair. The formula is designed to stay put in joints, offering a controlled, DIY-friendly alternative to complete regrouting.

Usage guide (quick tips)

1. Prepare: clean and dry the grout lines to remove dust and moisture.
2. Apply: squeeze the tube to fill gaps, then smooth with the included scraper for a flush finish.
3. Drying: allow touch dry in about 2 hours; avoid water contact for 24 hours for best moisture resistance.
4. Layering: for deep gaps, apply thin coats one at a time, letting each coat dry before the next.

Helpful notes

• Cap includes a nozzle pin to help prevent clogging and maintain fresh product between uses.
• Cleanup can be done with water before the product sets; the tube is designed for reuse on future touch-ups.