PC-Petrifier 8 oz + PC-Woody 6 oz Wood Repair Epoxy Kit | PC Products

Two-part wood repair made simple

Meet a practical, two-part solution from PC Products: PC-Petrifier, a water-based wood hardener, and PC-Woody, a durable epoxy paste. This convenient kit is designed to revitalize rotted wood and replace missing sections, guiding your project from deterioration to a finish-ready surface. The combination helps you tackle window sills, frames, beams, trim, and other wooden features with a clear, user-friendly approach.

PC-Petrifier offers deep penetration and consolidation for soft, rotted wood fibers, helping to seal and stabilize damaged areas. Its low-viscosity formula enables better absorption into grain and pores, while the water-based composition makes cleanup straightforward and aligns with eco-conscious decisions. PC-Woody is a permanent wood repair paste that provides structural strength, built to withstand weather, mildew, dry rot, UV exposure, and the chemicals found in pressure-treated wood. Once fully cured, the repaired area can be painted, stained, machined, sanded, or drilled to fit your project needs.

Key benefits

• Deep penetration: Petrifier soaks into rotted wood to stabilize fibers and reinforce surrounding material.
• Effective consolidation: Low-viscosity formulation helps reach tight pores and grain without clogging.
• Environmentally friendly: Water-based design supports easier cleanup and a lower environmental impact.
• Durable wood repair: Woody epoxy paste replaces missing wood with strong, finish-ready epoxy after curing.

Whether you’re restoring historic trim or preparing wood for primer, this kit offers a practical, controllable path to better results. The formulations are designed for interior and exterior use, providing resilience against typical weather and wear while accepting paint or stain for a seamless look. With proper curing, repaired surfaces are better prepared for finishing and ongoing protection against the elements.

How to use

• Apply PC-Petrifier to rotted wood to saturate and consolidate damaged fibers; allow to dry according to directions.
• Reassess the area; if soft pockets remain, reapply Petrifier to achieve stabilization.
• Use PC-Woody epoxy paste to fill gaps, replace missing wood, and smooth for a flush repair.
• Let fully cure, then sand, prime, paint, or stain as desired to finish the project.

This kit from PC Products brings a practical approach to wood restoration, combining penetrating consolidation with durable, finish-ready repair. It is built to support a range of projects from new construction refinishing to historic repairs, backed by a company with a long history in coating and restoration products.