Minwax Polycrylic Protective Finish Spray, 11.5 oz – Crystal Clear, Fast-Drying Wood Sealer

Overview

Keep interior wood projects looking fresh with the Minwax Polycrylic Protective Finish Spray. This crystal-clear top coat protects and enhances wood surfaces—furniture, trim, cabinets, and more—while preserving the natural beauty of the wood beneath. The clear finish resists scratches and blemishes, helping your pieces maintain their smooth, refined look over time. It dries crystal clear and remains non-yellowing, making it a versatile choice for both light woods and richly stained surfaces.

Key benefits at a glance

• Crystal-clear, non-yellowing finish that preserves color and grain.
• Good protection against scratches, scuffs, and everyday wear.
• Low odor with easy soap-and-water clean-up after use.
• Ultra-fast drying for quick recoats, boosting project turnaround.
• Compatible with Minwax oil- and water-based stains and a wide range of wood species.

Ideal uses

• Refinishing or protecting furniture, cabinets, and wood trim.
• Interior accents and decorative projects where a modern gloss is desired.
• Light woods such as maple, ash, or birch, as well as painted surfaces needing a clear top coat.
• Areas where a bright, crisp sheen complements the wood’s natural character.

How to apply (quick guidelines)

• Ensure the surface is dry, free of wax, grease, polish, and old finishes; sand smooth and remove dust.
• Shake the can vigorously for about two minutes; re-shake briefly after each minute of use.
• Hold the can vertically about 12" from the surface; spray in even, slightly overlapping strokes.
• Apply thin coats to prevent runs; three coats are recommended for best protection.
• Let each coat dry about 30 minutes; sand lightly with very fine 220-grit sandpaper between coats and remove dust.
• After the final coat, wait 1 hour before light handling and 24 hours before normal use.

Notes on finish and maintenance

This water-based top coat cleans up with soap and water, making the process less messy. Its clear gloss adds a sleek, bright finish without yellowing, helping light-stained or pastel-toned woods stay lively over time.