FIDISP Drill Pump for Water 750 GPH – Drill-Powered Water Transfer Kit

Overview

The FIDISP Drill Pump for Water is a compact, drill-powered transfer tool designed to move water and select liquids with ease. When paired with a high-speed drill (over 1300 RPM), it delivers a respectable head and flow in tight spaces where a full-size pump isn’t practical. This kit emphasizes practical versatility for real-life tasks around the home, yard, and workshop.

Key benefits at a glance

• Brass adapters (4 total) provide sturdy, corrosion-resistant connections with reliable sealing to help minimize leaks.
• Two hoses included: a 1/2-inch green water hose for liquids like water and a 1/4-inch clear hose for oils, expanding transfer possibilities.
• Powerful on-demand capability when used with fast-spinning drills, enabling higher head and flow compared with slower setups.
• Durable construction with corrosion‑resistant plastic parts and high-quality impellers suited for wet and oily environments.
• All-in-one kit ready for immediate setup: drill transfer pump, brass adapters, hoses, clamps, a filter, and fittings.

What you can do with it

Use the drill pump for tasks such as draining rain barrels, circulating water in aquariums, clearing clogged gutters, or transferring oil in automotive, marine, and garden situations. The design helps you work in cramped spaces where larger pumps aren’t convenient.

How it works and care tips

• Prime before use by adding a small amount of water or oil to the inlet to help prevent dry burning (max dry-run time: 30 seconds).
• The shaft diameter is 8 mm; align the inlet/outlet with the pump’s rotation direction for best results.
• Self-priming is best with liquids free of large impurities; if grit or stones are present, consider using a filter to reduce wear.
• When transferring oil, keep the inlet length under 25 inches and the outlet under 50 inches to maintain steady flow.

What’s included

• Drill transfer pump
• 2 brass 1/2" barb to 3/4" female GHT adapters
• 2 brass 1/4" barb to 3/4" female GHT adapters
• 2 hose clamps
• 1/2" green water hose
• 1/4" clear suction hose
• Teflon tape, water pipe fixture, and a filter

Note: This drill pump is intended for transferring liquids without large impurities and is not designed for manual operation. For best results, follow the rotation direction on your drill and monitor the liquid levels during use.